Ball joint extractor for trucks, buses and construction vehicles
- Better handling thanks to modern and ergonomic design.
- Self-adaptation of the upper arm through the concave trajectory of the pressure spindle.
- Progressively adjustable clamping span.
- Less effort for high extraction power.
- Simple adjustment of the clamping depth by means of a spring mechanism.
For pressing the ball studs when removing the ball joints, as well as the tie rod ends on the tie rods. Thanks to the adapter it can be used with the hydraulic spindle of the 800 series. Made of hardened, alloyed, highly resistant, and galvanized steel. The rolled thread has a special coating to withstand high loads.
| Referencia | Measurements (mm) | Fork opening (mm) | Opening range (mm) | Ball joint size (mm) | Tightening torque max. (Nm) | Max load (t) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 129-3 | 31x35-40x70 | 31 | 70 | 35-40 | 85 | 10 | 281,49€ |
|
281,490€ | ×1 | 1 | ||
| 129-4 | 40x50x85 | 40 | 85 | 50 | 125 | 15 | 299,65€ |
|
299,650€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
