HSS taper drill with stop
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right. CBN grinding and design
of the chip outlet channels guarantee optimum cutting without noise, vibrations or burrs. Suitable for non-ferrous metals,
steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick. Translucent plastic case with hanger.
| Referencia | Measurements (mm) | Size (no.) | Ø (mm) | Overall length (mm) | Number of steps | Stem Ø (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
101041
|
3.0-7.8 x 48 | 1 | 3.0-7.8 | 48 | - | 6 | - |
|
- | - | - | ||
|
101042
|
3.0-10.2 x 52 | 2 | 3.0-10.2 | 52 | - | 6 | 25,50€ |
|
25,500€ | ×1 | 1 | ||
|
101043
|
3.0-11.8 x 56 | 3 | 3.0-11.8 | 56 | - | 6 | 29,74€ |
|
29,740€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
