Conical countersink DIN 335 form C 90º HSS 1/4 hexagonal shank.
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right.
The CBN grinding and the design of the chip exit channels guarantee an optimal cut without noise, vibrations or burrs.
Suitable for non-ferrous metals, steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick.
Translucent plastic case with hanger. To connect directly to drills/drivers equipped with a 1/4” head and to any 1/4” bit holder.
| Referencia | Measurements (mm) | Ø (mm) | Overall length (mm) | Ø stem (in) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 102313 | 1.5-6.3 x 6.35x27 (38 shank) | 1.5-6.3 | 38 | 1/4" | 25,33€ |
|
25,330€ | ×1 | 1 | ||
| 102314 | 2-8.3 x 6.35x27 (38 shank) | 2-8.3 | 38 | 1/4" | 25,33€ |
|
25,330€ | ×1 | 1 | ||
| 102315 | 2.5-10.4 x 6.35x27 (41 shank) | 2.5-10.4 | 41 | 1/4" | 26,99€ |
|
26,990€ | ×1 | 1 | ||
| 102316 | 2.8-12.4 x 6.35x27 (42 shank) | 2.8-12.4 | 42 | 1/4" | 29,27€ |
|
29,270€ | ×1 | 1 | ||
| 102317 | 3.2-16.5 x 6.35x27 (47 shank) | 3.2-16.5 | 47 | 1/4" | 33,55€ |
|
33,550€ | ×1 | 1 | ||
| 102318 | 3.5-20.5 x 6.35x27 (48 shank) | 3.5-20.5 | 48 | 1/4" | 43,76€ |
|
43,760€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
