Conical countersink DIN 335 form C 90º HSS-TiN
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right.
The CBN grinding and the design of the chip exit channels guarantee an optimal cut without noise, vibrations or burrs.
Suitable for non-ferrous metals, steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick.
Translucent plastic case with hanger.
90º cutting angle. Cylindrical handle. 3 cutting edges.
Titanium nitride surface. Cut to the right.
Recommended for steel, cast iron, light and non-ferrous metals.
| Referencia | Measurements (mm) | Ø (mm) | Overall length (mm) | Stem Ø (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 102107T | 1.5-6.3 x 45 (5 shank) | 1.5-6.3 | 45 | 5 | 32,26€ |
|
32,260€ | ×1 | 1 | ||
| 102111T | 2.0-8.3 x 50 (6 shank) | 2.0-8.3 | 50 | 6 | 40,12€ |
|
40,120€ | ×1 | 1 | ||
| 102114T | 2.5-10.4 x 50 (6 shank) | 2.5-10.4 | 50 | 6 | 47,77€ |
|
47,770€ | ×1 | 1 | ||
| 102116T | 2.8-12.4 x 56 (8 shank) | 2.8-12.4 | 56 | 8 | 51,53€ |
|
51,530€ | ×1 | 1 | ||
| 102119T | 3.2-16.5 x 60 (8 shank) | 3.2-16.5 | 60 | 8 | 62,56€ |
|
62,560€ | ×1 | 1 | ||
| 102119-1T | 3.2-16.5 x 60 (10 shank) | 3.2-16.5 | 60 | 10 | 62,56€ |
|
62,560€ | ×1 | 1 | ||
| 102121T | 3.5-20.5 x 63 (10 shank) | 3.5-20.5 | 63 | 10 | 87,01€ |
|
87,010€ | ×1 | 1 | ||
| 102123T | 3.8-25.0 x 67 (10 shank) | 3.8-25.0 | 67 | 10 | 118,15€ |
|
118,150€ | ×1 | 1 | ||
| 102125T | 4.2-31.0 x 71 (12 shank) | 4.2-31.0 | 71 | 12 | 149,85€ |
|
149,850€ | ×1 | 1 | ||
102110T
|
2.0-8.0 x 50 (6 shank) | 2.0-8.0 | 50 | 6 | - |
|
- | - | - | ||
| 102113T | 2.5-10.0 x 50 (6 shank) | 2.5-10.0 | 50 | 6 | 46,31€ |
|
46,310€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
