Pack of twist drills turbo DIN 338 HSS milled-ground
Special for holes in sheets and thin profiles.
Cutting angle 130º - spiral angle 56º - h8 tolerance – cut to the right.
Manual drilling in thin sheets, clean holes without burrs.
For alloyed and unalloyed cast steel, up to 900 N/mm2. Special for drilling in sheets and thin profiles
up to 5.0mm. Wood and plastic. Handle with three edges from 5.0 mm.
| Referencia | Ø (mm) | Overall length (mm) | Cutting length (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|
2146050
|
5 | 86 | 46 | - |
|
- | - | - | ||
|
2146051
|
5.1 | 86 | 46 | 26,40€ |
|
2,640€ | ×1 | 10 (×10) | ||
|
2146052
|
5.2 | 86 | 46 | 27,50€ |
|
2,750€ | ×1 | 10 (×10) | ||
|
2146055
|
5.5 | 93 | 52 | 38,60€ |
|
3,860€ | ×1 | 10 (×10) | ||
|
2146060
|
6 | 93 | 57 | 39,60€ |
|
3,960€ | ×1 | 10 (×10) | ||
|
2146065
|
6.5 | 101 | 58 | 43,30€ |
|
4,330€ | ×1 | 10 (×10) | ||
|
2146070
|
7 | 109 | 66 | 51,60€ |
|
5,160€ | ×1 | 10 (×10) | ||
|
2146075
|
7.5 | 109 | 66 | 55,60€ |
|
5,560€ | ×1 | 10 (×10) | ||
|
2146080
|
8 | 117 | 72 | 60,30€ |
|
6,030€ | ×1 | 10 (×10) | ||
|
2146085
|
8.5 | 117 | 72 | - |
|
- | - | - | ||
|
2146090
|
9 | 125 | 78 | 74,90€ |
|
7,490€ | ×1 | 10 (×10) | ||
|
2146095
|
9.5 | 125 | 78 | 87,60€ |
|
8,760€ | ×1 | 10 (×10) | ||
|
2146100
|
10 | 133 | 84 | - |
|
- | - | - | ||
|
2146105
|
10.5 | 133 | 84 | - |
|
- | - | - | ||
|
2146110
|
11 | 142 | 91 | 58,75€ |
|
11,750€ | ×1 | 5 (×5) | ||
|
2146115
|
11.5 | 142 | 91 | - |
|
- | - | - | ||
|
2146120
|
12 | 151 | 98 | 77,85€ |
|
15,570€ | ×1 | 5 (×5) | ||
|
2146125
|
12.5 | 151 | 98 | 82,60€ |
|
16,520€ | ×1 | 5 (×5) | ||
|
2146130
|
13 | 151 | 98 | - |
|
- | - | - |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
