Double twist drill pack HSS ground with self-centering
Extra short and robust standard drill bit. Shorter than DIN 1897. Ideal for mounting work on material
thin-walled such as: sheets, flat irons and profiled irons. High resistance to breakage.
For use in hand drills. Usable on both sides.
Advantages DIN 1412 C: good centering, low pressure required.
Conical point grinding with split point according to DIN 1412 C.
Cutting angle: 118º. Ø-tolerance: h8. shiny surface. Cut to the right.
Applications: for alloyed and unalloyed steel and cast steel (up to a strength of ca. 900 N/mm²),
Gray cast iron, malleable cast iron, nodular cast iron, pressure casting, sintered iron, nickel silver,
graphite casting, aluminum alloys, bronze and brass.
Translucent plastic case label blue background.
| Referencia | Ø (mm) | Overall length (mm) | Cutting length (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|
252032
|
3.20 | 49 | 11 | 15,20€ |
|
1,520€ | ×1 | 10 (×10) | ||
| 2520325 | 3.25 | 49 | 11 | 26,24€ |
|
2,624€ | ×1 | 10 (×10) | ||
| 252033 | 3.30 | 49 | 11 | 26,24€ |
|
2,624€ | ×1 | 10 (×10) | ||
|
252041
|
4.10 | 55 | 14 | 18,00€ |
|
1,800€ | ×1 | 10 (×10) | ||
|
252042
|
4.20 | 55 | 14 | 18,00€ |
|
1,800€ | ×1 | 10 (×10) | ||
|
252045
|
4.50 | 58 | 17 | 22,50€ |
|
2,250€ | ×1 | 10 (×10) | ||
|
252048
|
4.80 | 62 | 17 | 24,80€ |
|
2,480€ | ×1 | 10 (×10) | ||
|
252049
|
4.90 | 62 | 17 | 24,80€ |
|
2,480€ | ×1 | 10 (×10) | ||
|
252050
|
5.00 | 62 | 17 | 34,60€ |
|
3,460€ | ×1 | 10 (×10) | ||
|
252052
|
5.20 | 62 | 17 | 31,20€ |
|
3,120€ | ×1 | 10 (×10) |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
