Female thread restorer
<img 
<img <img
- No need to calibrate.
- Step and size automatic adjustment.
- Use the intact parts of the thread as a guide and repair only the damaged areas.
- Hardened blades (HSS).
- Removes rust and burrs.
- Yellow polyamide protective caps - Essential in the repair of soft metal threads.
<img 
<img 
Insert the blade (B) completely inside the casing (H) by turning the knurled knob (K). Then insert the female thread restorer into the threaded hole or perforation to be repaired.
By turning the knurled knob (K), lower the blade (B) into a thread groove in the undamaged area and tighten firmly by hand.
Then, rotate the female thread restorer with the bracket in the desired direction, as shown in the figure.</img
| Referencia | Ø (mm) | Ø (in) | L1 (mm) | B1 (mm) | H1 (mm) | ROD (mm) | Ør (mm) | ØR (mm) | L1(in) | B1(in) | H1(in) | ROD (in) | Or (in) | ØR (in) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
244802
|
16.0 - 20.0 | 11/16"-13/16" | 111 | 21 | 53 | 130 | 20 | 45 | 4 3/8" | 13/16" | 2 1/16" | 5 1/8" | 13/16" | 1 3/4" | - |
|
- | - | - | ||
|
244803
|
22.0 - 32.0 | 7/8"-1 1/4" | 136 | 27 | 64 | 161 | 27 | 54 | 5 3/8" | 1 1/16" | 2 1/2" | 6 3/8" | 1 1/16" | 2 1/8" | 117,18€ |
|
117,180€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
