2-shell inner bearing extractor for needle roller bearings
- Two-hull version with extra-large rims for safer ejection.
- The interior opening stop protects the extractor against the effects of excess load.
- They can be combined both with counter supports and with inertia hammers.
- The optional extensions of the 21-V series allow reaching the deepest bearings.
- To remove needle roller bearings from crankshafts, housings, etc.
- Robust design, high performance and long service life.
- Double segment design with additional large gripping edges ensures safe removal.
- The internal pullers are equipped with an internal safety stop to protect against excess tension and overload and consequent possible breakage.
- Can be used with counter braces or impact bar.
- Includes a tube of special Kukko grease to keep the spindle properly lubricated.
| Referencia | Inner Ø (mm) | Apt to | Ø axis (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|
21-40
|
9.6-18 | Bridge 22-1 or 22-2; Slide Hammer 22-0 or 22-0-1 | 10 | - |
|
- | - | - | ||
|
21-41
|
11.5-19 | Bridge 22-1 or 22-2; Slide Hammer 22-0 or 22-0-1 | 12 | - |
|
- | - | - | ||
|
21-42
|
12.5-21 | Bridge 22-1 or 22-2; Slide Hammer 22-0 or 22-0-1 | 14 | - |
|
- | - | - | ||
|
21-43
|
14.5-22 | Bridge 22-1 or 22-2; Slide Hammer 22-0 or 22-0-1 | 15+16 | 148,71€ |
|
148,710€ | ×1 | 1 | ||
|
21-44
|
16.5-23 | Bridge 22-1 or 22-2; Slide Hammer 22-0 or 22-0-1 | 17+18 | - |
|
- | - | - | ||
|
21-45
|
18.5-24 | Bridge 22-1 or 22-2; Slide Hammer 22-0 or 22-0-1 | 20 | 148,71€ |
|
148,710€ | ×1 | 1 | ||
|
21-46
|
20-25 | Bridge 22-1 or 22-2; Slide Hammer 22-0 or 22-0-1 | 22 | 148,71€ |
|
148,710€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
