Bearing separator
- The recessed blades allow removal of flush-mounted parts.
- Large contact surface to take care of the part to be removed.
- Maximum extraction stability.
- All components can be supplied as a replacement part thanks to the number engraved on the part.
- For removing ball bearings, needle roller bearings, inner rings and other parts when there is not enough space to use pulling feet.
- The spreader jaws are brought together by evenly tightening the side bolt nuts.
- Robust design, high performance and long service life.
[b]Note:[b/] When there is sufficient space, the 17-series spreaders are a good alternative as the jaws can be quickly tightened with the built-in pressure spindle.
| Referencia | Measurements (mm) | Ø (mm) | Width (mm) | Extraction device | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 15-00 | 40 | 6-40 | 40 | 18-0 | 127,13€ |
|
127,130€ | ×1 | 1 | ||
| 15-0 | 60 | 8-60 | 60 | 18-0 | 136,21€ |
|
136,210€ | ×1 | 1 | ||
| 15-1 | 75 | 12-75 | 75 | 18-1 | 177,07€ |
|
177,070€ | ×1 | 1 | ||
| 15-2 | 115 | 22-115 | 115 | 18-2 | 272,41€ |
|
272,410€ | ×1 | 1 | ||
| 15-3 | 155 | 25-155 | 155 | 18-3 | 440,40€ |
|
440,400€ | ×1 | 1 | ||
| 15-4 | 200 | 30-200 | 200 | 18-4 | 1.257,64€ |
|
1.257,640€ | ×1 | 1 | ||
| 15-5 | 250 | 30-250 | 250 | 18-5 | 1.788,84€ |
|
1.788,840€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
