Ball joint extractor with short hydraulic spindle
- Less effort for high extraction power.
- The axial reciprocating plunger does not rotate in the hydraulic spindle.
- The depth stop on the spindle heads prevents the wrench from slipping.
For ejecting tightly set ball joint pins when removing ball joints and tie rod heads on tie rods, for medium trucks, buses and construction vehicles.
Hydraulic lubrication system.
Simple adjustment of the clamping depth by means of a spring mechanism.
The rolled thread has a special coating.
Made of hardened, alloyed, highly resistant, galvanized steel.
| Referencia | Measurements (mm) | Fork opening (mm) | Opening range (mm) | Ball joint size (mm) | Tightening torque max. (Nm) | Max load (t) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 129-3-H | 34x34-40x70 | 31 | 70 | 35-40 | 25 | 10 | 576,61€ |
|
576,610€ | ×1 | 1 | ||
| 129-4-H | 40x50x85 | 40 | 85 | 50 | 35 | 15 | 817,24€ |
|
817,240€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
