HSS taper drill
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right. CBN grinding and design
of the chip outlet channels guarantee optimum cutting without noise, vibrations or burrs. Suitable for non-ferrous metals,
steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick. Translucent plastic case with hanger.
| Referencia | Measurements (mm) | Size (no.) | Ø (mm) | Overall length (mm) | Number of steps | Stem Ø (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 101001 | 3.0-14.0 x 58 | 1 | 3.0-14.0 | 58 | - | 6 | 23,56€ |
|
23,560€ | ×1 | 1 | ||
| 101002 | 5.0-20.0 x 71 | 2 | 5.0-20.0 | 71 | - | 8 | 33,56€ |
|
33,560€ | ×1 | 1 | ||
| 101003 | 16.0-30.5 x 76 | 3 | 16.0-30.5 | 76 | - | 9 | 59,94€ |
|
59,940€ | ×1 | 1 | ||
| 101004 | 240-40.0 x 89 | 4 | 240-40.0 | 89 | - | 10 | 127,06€ |
|
127,060€ | ×1 | 1 | ||
| 101005 | 36.0-50.0 x 97 | 5 | 36.0-50.0 | 97 | - | 12 | 177,79€ |
|
177,790€ | ×1 | 1 | ||
| 101006 | 40.0-61.0 x 103 | 6 | 40.0-61.0 | 103 | - | 13 | 302,37€ |
|
302,370€ | ×1 | 1 | ||
| 101007 | 5.0-25.4 x 87 | 7 | 5.0-25.4 | 87 | - | 10 | 72,46€ |
|
72,460€ | ×1 | 1 | ||
| 101008 | 5.0-31.0 x 103 | 8 | 5.0-31.0 | 103 | - | 9 | 78,88€ |
|
78,880€ | ×1 | 1 | ||
| 101022 | 5.0-22.5 x 79 | 9 | 5.0-22.5 | 79 | - | 8 | 51,56€ |
|
51,560€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
