Conical countersink DIN 335 form C 90º HSS long cylindrical shank
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right.
The CBN grinding and the design of the chip exit channels guarantee an optimal cut without noise, vibrations or burrs.
Suitable for non-ferrous metals, steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick.
Translucent plastic case with hanger.
Countersink angle 90º. Long cylindrical handle. 3 cutting edges.
Recommended for steel, cast iron, light and non-ferrous metals.
| Referencia | Measurements (mm) | Ø (mm) | Overall length (mm) | Stem Ø (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 102271 | 1.5-6.3 x 85 (5 shank) | 1.5-6.3 | 85 | 5 | 40,20€ |
|
40,200€ | ×1 | 1 | ||
| 102272 | 2-8.3 x 85 (6 shank) | 2-8.3 | 85 | 6 | 41,86€ |
|
41,860€ | ×1 | 1 | ||
| 102273 | 2.5-10.4 x 108 (6 shank) | 2.5-10.4 | 108 | 6 | 42,44€ |
|
42,440€ | ×1 | 1 | ||
| 102274 | 2.8-12.4 x 108 (8 shank) | 2.8-12.4 | 108 | 8 | 45,35€ |
|
45,350€ | ×1 | 1 | ||
| 102275 | 3.2-15 x 110 (10 shank) | 3.2-15 | 110 | 10 | 51,53€ |
|
51,530€ | ×1 | 1 | ||
| 102276 | 3.2-16.5 x 112 (10 shank) | 3.2-16.5 | 112 | 10 | 52,63€ |
|
52,630€ | ×1 | 1 | ||
| 102277 | 3.5-20.5 x 115 (10 shank) | 3.5-20.5 | 115 | 10 | 61,34€ |
|
61,340€ | ×1 | 1 | ||
| 102278 | 3.8-25 x 118 (10 shank) | 3.8-25 | 118 | 10 | 77,89€ |
|
77,890€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
