Conical countersink DIN 335 form C 90º HSS special for aluminum
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right.
The CBN grinding and the design of the chip exit channels guarantee an optimal cut without noise, vibrations or burrs.
Suitable for non-ferrous metals, steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick.
Translucent plastic case with hanger.
Countersink angle 90º. Cylindrical handle. 3 cutting edges. Cut to the right.
Special for aluminum.
| Referencia | Measurements (mm) | Ø (mm) | Overall length (mm) | Stem Ø (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 102107A | 1.5-6.3 x 45 (5 shank) | 1.5-6.3 | 45 | 5 | 18,88€ |
|
18,880€ | ×1 | 1 | ||
| 102111A | 2-8.3 x 50 (6 shank) | 2-8.3 | 50 | 6 | 21,42€ |
|
21,420€ | ×1 | 1 | ||
| 102114A | 2.5-10.4 x 50 (6 shank) | 2.5-10.4 | 50 | 6 | 24,57€ |
|
24,570€ | ×1 | 1 | ||
| 102116A | 2.8-12.4 x 56 (8 shank) | 2.8-12.4 | 56 | 8 | 27,41€ |
|
27,410€ | ×1 | 1 | ||
| 102119A | 3.2-16.5 x 60 (8 shank) | 3.2-16.5 | 60 | 8 | 32,87€ |
|
32,870€ | ×1 | 1 | ||
| 102119-1A | 3.2-16.5 x 60 (10 shank) | 3.2-16.5 | 60 | 10 | 32,87€ |
|
32,870€ | ×1 | 1 | ||
| 102121A | 3.5-20.5 x 63 (10 shank) | 3.5-20.5 | 63 | 10 | 45,73€ |
|
45,730€ | ×1 | 1 | ||
| 102123A | 3.8-25 x 67 (10 shank) | 3.8-25 | 67 | 10 | 64,60€ |
|
64,600€ | ×1 | 1 | ||
| 102125A | 4.2-31 x 71 (12 shank) | 4.2-31 | 71 | 12 | 88,06€ |
|
88,060€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
