Conical countersink DIN 335 form C 90º HSS-Co 5
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right.
The CBN grinding and the design of the chip exit channels guarantee an optimal cut without noise, vibrations or burrs.
Suitable for non-ferrous metals, steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick.
Translucent plastic case with hanger.
Countersink angle 90º. Cylindrical handle. 3 cutting edges. Cut to the right.
Special for high alloy steel such as V2A and V4A.
| Referencia | Measurements (mm) | Ø (mm) | Overall length (mm) | Stem Ø (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 102107E | 1.5-6.3 x 45 (5 shank) | 1.5-6.3 | 45 | 5 | 14,99€ |
|
14,990€ | ×1 | 1 | ||
| 102110E | 2-8 x 50 (6 shank) | 2-8 | 50 | 6 | 21,42€ |
|
21,420€ | ×1 | 1 | ||
| 102111E | 2-8.3 x 50 (6 shank) | 2-8.3 | 50 | 6 | 16,05€ |
|
16,050€ | ×1 | 1 | ||
| 102113E | 2.5-10 x 50 (6 shank) | 2.5-10 | 50 | 6 | 25,70€ |
|
25,700€ | ×1 | 1 | ||
| 102114E | 2.5-10.4 x 50 (6 shank) | 2.5-10.4 | 50 | 6 | 18,90€ |
|
18,900€ | ×1 | 1 | ||
| 102116E | 2.8-12.4 x 56 (8 shank) | 2.8-12.4 | 56 | 8 | 28,18€ |
|
28,180€ | ×1 | 1 | ||
| 102119E | 3.2-16.5 x 60 (8 shank) | 3.2-16.5 | 60 | 8 | 34,27€ |
|
34,270€ | ×1 | 1 | ||
| 102119-1E | 3.2-16.5 x 60 (10 shank) | 3.2-16.5 | 60 | 10 | 34,27€ |
|
34,270€ | ×1 | 1 | ||
| 102121E | 3.5-20.5 x 63 (10 shank) | 3.5-20.5 | 63 | 10 | 31,04€ |
|
31,040€ | ×1 | 1 | ||
| 102123E | 3.8-25 x 67 (10 shank) | 3.8-25 | 67 | 10 | 36,04€ |
|
36,040€ | ×1 | 1 | ||
| 102125E | 4.2-31 x 71 (12 shank) | 4.2-31 | 71 | 12 | 43,99€ |
|
43,990€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
