Catálogo Cutting tool Ruko Countersinks Conical countersinks

Conical countersink DIN 335 form C 90º Carbide K20

Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right.
The CBN grinding and the design of the chip exit channels guarantee an optimal cut without noise, vibrations or burrs.
Suitable for non-ferrous metals, steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick.
Translucent plastic case with hanger.

Countersink angle 90º. Cylindrical handle. 3 cutting edges. Cut to the right. Integral hard metal head.
Special for abrasive and high-alloy steels with a consistency greater than 1,000 n/mm2,
GG greater than 240 HB.

Referencia	Measurements (mm)	Ø (mm)	Overall length (mm)	Stem Ø (mm)	PVR*	PVR*/UD envase	Mult. compra	ENVASES / embalaje
102261	1.5-6.3 x 45 (5 shank)	1.5-6.3	45	5	127,17€	127,170€	×1	1	FICHA AT FICHA GENÉRICA
102262	2-8.3 x 50 (6 shank)	2-8.3	50	6	143,38€	143,380€	×1	1	FICHA AT FICHA GENÉRICA
102263	2.5-10.4 x 50 (6 shank)	2.5-10.4	50	6	149,86€	149,860€	×1	1	FICHA AT FICHA GENÉRICA
102264	2.8-12.4 x 56 (8 shank)	2.8-12.4	56	8	169,68€	169,680€	×1	1	FICHA AT FICHA GENÉRICA
102265	3.2-16.5 x 60 (10 shank)	3.2-16.5	60	10	-	-	-	-	FICHA AT FICHA GENÉRICA
102266	3.5-20.5 x 63 (10 shank)	3.5-20.5	63	10	-	-	-	-	FICHA AT FICHA GENÉRICA
102267	3.8-25 x 67 (10 shank)	3.8-25	67	10	-	-	-	-	FICHA AT FICHA GENÉRICA
102268	4.2-31 x 71 (12 shank)	4.2-31	71	12	-	-	-	-	FICHA AT FICHA GENÉRICA