Manual countersink DIN 335 form C 90º
Cutting point with split point DIN 1412 C. Cutting angle 118º. Cone angle 20/30º. Cut to the right.
The CBN grinding and the design of the chip exit channels guarantee an optimal cut without noise, vibrations or burrs.
Suitable for non-ferrous metals, steel, thermoplastics and hard plastics, as well as sheet metal up to 4 mm thick.
Translucent plastic case with hanger.
| Referencia | Measurements (mm) | Ø (mm) | Overall length (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|
| 102143 | 12.5x132 | 12.5 | 132 | 36,96€ |
|
36,960€ | ×1 | 1 | ||
| 102144 | 15x132 | 15 | 132 | 40,52€ |
|
40,520€ | ×1 | 1 | ||
| 102145 | 16.5x132 | 16.5 | 132 | 45,25€ |
|
45,250€ | ×1 | 1 | ||
| 102146 | 20.5x137 | 20.5 | 137 | 59,53€ |
|
59,530€ | ×1 | 1 | ||
| 102147 | 25x142 | 25 | 142 | 69,73€ |
|
69,730€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
