Universal two-legged bearing extractor Economy
- Quick change or twist of the extraction legs by pressing down on the end latch.
- It can be used as an external and internal extractor by turning the extraction hooks.
- The depth stop on the spindle heads prevents the wrench from slipping.
- All components can be supplied as a replacement part thanks to the number engraved on the part.
To remove bearings, sprockets, discs, etc.
Standard pull hooks.
The depth stop on the spindle heads prevents the wrench from slipping.
Extraction hooks that can be moved progressively along the crossbar.
mechanical spindle.
Interchangeable spindle tip.
The rolled thread has a special coating.
If there is sufficient clearance to handle the part to be removed, we recommend using a 3-jaw puller for optimal load distribution.
| Referencia | Measurements (mm) | Width (mm) | Reach (mm) | Spindle head (mm) | PVR* | Disponibilidad |
PVR*/UD envase |
Mult. compra |
ENVASES / embalaje |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 120-1 | 100x100 | 100 | 100 | 17 | 131,67€ |
|
131,670€ | ×1 | 1 | ||
| 120-10 | 150x100 | 150 | 100 | 17 | 140,75€ |
|
140,750€ | ×1 | 1 | ||
| 120-2 | 150x150 | 150 | 150 | 17 | 258,79€ |
|
258,790€ | ×1 | 1 | ||
| 120-20 | 250x150 | 250 | 150 | 17 | 286,03€ |
|
286,030€ | ×1 | 1 | ||
| 120-3 | 250x200 | 250 | 200 | 24 | 390,46€ |
|
390,460€ | ×1 | 1 | ||
| 120-30 | 350x200 | 350 | 200 | 24 | 463,10€ |
|
463,100€ | ×1 | 1 |
Altadisponibilidad
Bajadisponibilidad
Sindisponibilidad
Mercancíaen camino
Bajopedido
*
Precio antes de impuestos.
Referencia marcada como disponible hasta fin de existencias.Información adicional
