Erizo

Catálogo

Files and Rasps

Engineer Files

Engineer's flat file

It is a flat, tapered steel engineer's file for general use in mechanical workshops for the roughing, fitting and finishing of parts.

Engineer's hand file

It is a flat, parallel steel engineer's file, designed for filing keyways, flat surfaces and precision fits.

Engineer's three-square file

It is a triangular-section steel engineer's file, designed for filing corners, sharp angles, thread teeth and milling cutter teeth, and flat surfaces.

Engineer's half-round file, double cut

Engineer's half-round file with double cut, 100-350 mm.

Engineer's square file

It is a square-section steel engineer's file, designed for filing keyway slots, square openings and right angles.

Engineer's round file

It is a round-section steel engineer's file, designed for filing holes and concave surfaces.

Engineer's knife file

It is a knife-shaped steel engineer's file, with a very elongated triangular section, designed for filing sharp angles in dies and gear teeth.

Engineer's warding file

It is a thin steel engineer's file for keys, with the same shape as the flat file but much thinner and more pointed, designed for precision mechanical work, locksmithing and gunsmithing.

Files for Soft Metals

Half-round file for soft metals

It is a half-round file for soft metals, designed for filing lead, anti-friction metal and other soft metals.

Special Files

Needle file

It is a needle file for fine precision mechanical work: jewellery, watchmaking, engraving and similar.

Milled car body file

It is a milled car body file, used for roughing and shaping filler and sheet metal in body-shop work.

6-piece needle file set

It is a set of 6 needle files, one of each shape, for fine precision work.

12-piece needle file set

It is a set of 12 needle files, two of each shape, for fine precision work.

Car body file holder

Holder for 14" (350 mm) car body file.

Saw Files

Regular taper saw file

It is a triangular-section saw file, with converging edges at one end, designed to sharpen hand saws, band saws and any other saw with 60-degree tooth angles.

Slim taper saw file

It is a triangular-section saw file, with converging edges at one end, designed to sharpen hand saws, band saws and any other saw with 60-degree tooth angles.

Extra slim taper saw file

It is a triangular-section saw file, with converging edges at one end, designed to sharpen hand saws, band saws and any other saw with 60-degree tooth angles.

Mill blunt (parallel) saw file

It is a flat, parallel saw file (Mill Blunt), designed for sharpening cross-cut, reciprocating and circular saws.

Double-edge saw file (rhombic)

It is a rhombic, double-edge saw file, designed to sharpen and lower the gullets between the teeth of saws with fine, straight teeth.

Chainsaw file

It is a chainsaw file made of special high-chromium-content steel, with a round section of constant radius.

Rasps

Half-round rasp

It is a half-round rasp, designed for working wood and soft metals.

Round rasp

It is a round rasp, designed for working wood and soft metals.

Horse Rasps

1/4 horse rasp

It is a 1/4 horse rasp, with combined file and rasp cut, for the care of the horse's hoof.

1/2 tanged horse rasp

It is a tanged 1/2 horse rasp, with file cut on one face and rasp cut on the other, for the care of the horse's hoof.

Loose Handles

Black plastic file handle

Loose black polypropylene plastic file handle for fitting onto handle-less files.

Loose bi-material handle

Loose soft-grip bi-material handle supplied with 5 adapters for universal use with files.

Files and Rasps with Handle

Engineer's flat file with bi-material handle

Engineer's flat file with soft-grip bi-material handle and hanging hole for display-stand presentation.

Engineer's hand file with bi-material handle

Engineer's hand file with soft-grip bi-material handle and hanging hole for display-stand presentation.

Engineer's three-square file with bi-material handle

Engineer's three-square file with soft-grip bi-material handle and hanging hole for display-stand presentation.

Engineer's half-round file with bi-material handle

Engineer's half-round file with soft-grip bi-material handle and hanging hole for display-stand presentation.

Engineer's square file with bi-material handle

Engineer's square file with soft-grip bi-material handle and hanging hole for display-stand presentation.

Engineer's round file with bi-material handle

Engineer's round file with soft-grip bi-material handle and hanging hole for display-stand presentation.

Chainsaw file with bi-material handle

Chainsaw file with soft-grip bi-material handle and hanging hole for display-stand presentation.

Half-round rasp with bi-material handle

Half-round rasp with soft-grip bi-material handle and hanging hole for display-stand presentation.

Round rasp with bi-material handle

Round rasp with soft-grip bi-material handle and hanging hole for display-stand presentation.

Twist Drills for Metal

DIN 338 3-flat shank

HSS-G M2 Step Tip drill for metal DIN 338 type N series 105 Evomaxx

ER105 - HSS-G M2 Step Tip twist drill DIN 338 type N 118°

Set of hSS-G M2 Step Tip drill for metal DIN 338 type N series 105 Evomaxx

ER105P - HSS-G M2 Step Tip twist drill DIN 338 type N 118°

HSS-E Co5 M35 Step Tip drill for metal DIN 338 type N series 115 Evomaxx

ER115 - HSS-E Co5 M35 Step Tip twist drill DIN 338 type N 135°

Set of hSS-E Co5 M35 Step Tip drill for metal DIN 338 type N series 115 Evomaxx

ER115P - HSS-E Co5 M35 Step Tip twist drill DIN 338 type N 135°

HSS-E Co5 M35 drill for metal DIN 338 type UNI series 114 Evomaxx

ER114 - HSS-E Co5 M35 twist drill DIN 338 type UNI 135°

Set of hSS-E Co5 M35 drill for metal DIN 338 type UNI series 114 Evomaxx

ER114P - HSS-E Co5 M35 twist drill DIN 338 type UNI 135°

HSS-E Co5 M35 drill for metal DIN 338 type UNI series 114 Evomaxx

ER114B - HSS-E Co5 M35 twist drill DIN 338 type UNI 135°

HSS-G M2 Step Tip drill for metal DIN 338 type N series 105 Evomaxx

ER105B - HSS-G M2 Step Tip twist drill DIN 338 type N 118°

HSS-E Co5 M35 Step Tip drill for metal DIN 338 type N series 115 Evomaxx

ER115B - HSS-E Co5 M35 Step Tip twist drill DIN 338 type N 135°

DIN 338 cylindrical shank

HSS-G M2 drill for metal DIN 338 type N series 101 Superior

ER101 - HSS-G M2 twist drill DIN 338 type N 118°

Set of hSS-G M2 drill for metal DIN 338 type N series 101 Superior

ER101P - HSS-G M2 twist drill DIN 338 type N 118°

HSS-G drill for metal DIN 338 type N series 109 Perfect

ER109 - HSS-G DIN 338 type N ground twist drill, 118°, cylindrical shank

Set of HSS-G drills for metal DIN 338 type N series 109 Perfect

ER109P - Set of HSS-G DIN 338 type N ground drills for metal, 118°, professional

HSS-E Co5 M35 drill for metal DIN 338 type VA series 113 Superior

ER113 - HSS-E Co5 M35 twist drill DIN 338 type VA 130°

Set of hSS-E Co5 M35 drill for metal DIN 338 type VA series 113 Superior

ER113P - HSS-E Co5 M35 twist drill DIN 338 type VA 130°

HSS-E Co5 M35 drill for metal DIN 338 type N series 111 Perfect

ER111 - HSS-E Co5 M35 twist drill DIN 338 type N 135°

Set of hSS-E Co5 M35 drill for metal DIN 338 type N series 111 Perfect

ER111P - HSS-E Co5 M35 twist drill DIN 338 type N 135°

HSS-E Co5 M35 drill for metal DIN 338 type N series 111 Perfect

ER111B - HSS-E Co5 M35 twist drill DIN 338 type N 135°

HSS-G M2 drill for metal DIN 338 type N series 101 Superior

ER101B - HSS-G M2 twist drill DIN 338 type N 118°

HSS-E Co5 M35 drill for metal DIN 338 type VA series 113 Superior

ER113B - HSS-E Co5 M35 twist drill DIN 338 type VA 130°

DIN 340 cylindrical shank

HSS-G M2 long drill for metal DIN 340 type N series 128 Superior

ER128 - HSS-G M2 long twist drill DIN 340 type N 118°

Metal Cutting Tools

Step Drills

HSS-G spiral step drill series 316 Superior

ER316 - HSS-G spiral step drill for metal

Set of HSS-G spiral step drills series 316 Superior

ER316 - HSS-G spiral step drill for metal

HSS-G straight-flute step drill series 353 Perfect

ER353 - HSS-G straight-flute step drill for metal

Set of HSS-G straight-flute step drills series 353 Perfect

ER353 - HSS-G straight-flute step drill for metal

HSSTiAlN step drill series 309 Evomaxx

ER309 - HSS-G TiAlN spiral Step Tip step drill for metal

Set of HSSTiAlN step drills series 309 Evomaxx

ER309 - HSS-G TiAlN spiral Step Tip step drill for metal

Core Drills

HSS-G core drill, 30 mm, WELDON shank, series 711

It is an HSS-G core drill, with a 30 mm cutting depth, fully CBN-ground for high cutting performance and a long tool life.

HSS-G core drill, 55 mm, WELDON shank, series 713

It is an HSS-G core drill, with a 55 mm cutting depth, fully CBN-ground for high cutting performance and a long tool life.

HSSE-Co5 core drill, 30 mm, WELDON shank, series 712

It is an HSSE-Co5 core drill, with a 30 mm cutting depth, fully CBN-ground for high cutting performance and a long tool life.

HSSE-Co5 core drill, 55 mm, WELDON shank, series 714

It is an HSSE-Co5 core drill, with a 55 mm cutting depth, fully CBN-ground for high cutting performance and a long tool life.

Countersinks

HSS-G countersink DIN 335 C 90° U-Flute, series 201, SUPERIOR

High-performance HSS-G countersink, Split Point DIN 1412 C, 3 edges, for metal and plastics. DIN 335 C 90° standard.

Countersink set 201 (HSS-G, SUPERIOR)

Assorted countersink set of several diameters, 201 (HSS-G, SUPERIOR).

HSS-E Co5 countersink DIN 335 C 90° U-Flute, series 210, SUPERIOR

High-performance HSS-E Co5 countersink, for stainless steel V2A/V4A, Split Point DIN 1412 C. DIN 335 C 90°.

Countersink set 210 (HSS-E Co5, SUPERIOR)

Assorted countersink set of several diameters, 210 (HSS-E Co5, SUPERIOR).

HSS-TiN countersink DIN 335 C 90° U-Flute, series 264, EVOMAXX

HSS countersink with TiN coating, 5 cutting edges, Split Point. DIN 335 C 90°.

Countersink set 264 (HSS-TiN, EVOMAXX)

Assorted countersink set of several diameters, 264 (HSS-TiN, EVOMAXX).

HSS-TiN black countersink DIN 335 C 90° U-Flute, series 267, EVOMAXX

HSS countersink with black TiN, suitable for dry machining, 5 cutting edges. DIN 335 C 90°.

Countersink set 267 (HSS-TiN black, EVOMAXX)

Assorted countersink set of several diameters, 267 (HSS-TiN black, EVOMAXX).

Thread-Cutting Tools

21-piece hand tap set

Set of 21 hand taps, sizes M3 to M12, for internal threading.

29-piece tap and drill set

Set of 29 pieces: hand taps and pilot drills, M3 to M12.

32-piece tap and die set

Set of 32 pieces: hand taps and circular dies, M3 to M12.

16-piece short machine tap set

Set of 16 short machine taps, sizes M3 to M12, 2 units per size.

15-piece machine tap and drill set

Set of 15 pieces: machine taps and pilot drills, M3 to M12.

8-piece circular die set

Set of 8 circular dies of 25 mm, sizes M3 to M10, for external threading.

Thread-cutting tool set metric M3-M12

Thread-cutting set metric M3-M12: taps, dies and pilot drills.

Thread-cutting tool set metric fine M3-M12

Thread-cutting set metric fine M3-M12: taps, dies and pilot drills.

Thread-cutting tool set metric M3-M20

Thread-cutting set metric M3-M20: taps, dies and pilot drills.

Thread-cutting tool set metric fine M3-M20

Thread-cutting set metric fine M3-M20: taps, dies and pilot drills.

Masonry Drills

SDS Plus Drills

SDS Plus hammer drill bit, single tip, single flute

It is an SDS Plus hammer drill bit with a single carbide tip for concrete and reinforced concrete.

SDS Plus hammer drill bit, solid cross tip, double flute

It is a high-performance SDS Plus hammer drill bit with a solid carbide head (4 cutting edges) and double flute, for concrete and natural stone.

Cylindrical Shank Drills

Standard masonry drill bit, carbide tip, DIN 8039

It is a professional masonry drill bit, made of special hardened, high-toughness steel, with a carbide tip of impact-resistant alloy, designed for percussion drilling in concrete, clinker, granite and